lubricants Archives - ARMB

Tag: lubricants

ARMB lubricants

When Vibrations & Unusual Noises Tell You It Is Time to Replace Your Gearbox

A gearbox is an important piece of machinery that is used in most machines for smooth power transmission and working. Though gearbox does make some sort of vibration or noise, however when it starts to vibrate and creak it usually indicates that something is wrong. Neglecting these problems can result in serious mechanical damage, burdensome repairs, and unanticipated downtime. ARMB lubricants are among the highest quality diesel engine oils and grease lubricants available, and they can solve these issues in no time and help your gearbox perform better than ever.

In this article, we will take a look at what is happening within a gearbox to cause vibrations and odd noises and we will then describe how ARMB lubricants can be used to keep them functioning correctly.

Gearbox vibrations and noise identification

The vibrations and noises in gearbox generally occur due to mechanical wear, lack of lubrication, or any external changes. Let breeding ground be the root of damage that must be avoided Here are some common reasons:

  1. A) Misalignment

If the gearbox is not mounted in line with the motor or driven equipment, uneven loads may be placed on the gearbox output shaft. This causes too much vibration and noise, and as time goes on, it can cause damage to bearings and gears.

  1. B) Insufficient Lubrication

The lubrication system must work properly because lubrication reduces friction and wear of the gearbox. Without lubrication, the components rub together, creating noise, excess heat, and increased wear. The grease and lubricants produced by grease lubricants are optimally designed for protection under different operating conditions.

C)Worn-Out Bearings

The key enablement for rotational movement of gears is for them to rest on a bearing. Bearings can wear out from excessive loads, dirt ingress, or lack of lubrication over the years, causing vibration and rumbling sounds.

D)Gear Damage

The uneven meshing of damaged or chipped gears causes abnormal sounds and vibrations. Taking precautions through regular inspection and maintenance is the best way to spot gear damage early on.

E) Contamination

Contaminants, like dust and dirt, along with other dust aggregation entering the gearbox may not only disturb the process of gear rotation, it may also be a source of noise and vibration. They have seals and lube to keep out contaminants.

F) Overloading

One important fact is that driving a gearbox beyond the load capacity for which it was designed can lead to the overloading of its components and vibration and unusual noise.

Still another common gearbox issue ARMB Lubricants tackle

ARMB lubricants have been specifically designed to counter these challenges so that your gearbox performs efficiently. This is how ARMB products differentiate from others:

Superior Lubrication

ARMB diesel engine oils and grease lubricants are engineered with the addition of additives to provide optimum lubrication under high pressure, temperature stress, and in-service conditions. This minimizes friction, and wear, and also extends the service life of the gearbox components.

Better Contamination & Damage Resistance

ARMB lubricants have an advanced formula, which has various additives that counter contamination and help to prevent building up of dust and dirt within the gearbox. This ensures reliability and minimal maintenance requirements.

High Load-Bearing Capacity

AMRB lubricants can withstand excessive loads and are, as such, the perfect solution for heavy-duty gearboxes for industrial and automotive applications. The incredible strength of film and rugged nature of their product means they are generally less likely to become damaged even in extreme conditions.

Thermal Stability

It is very common for gearboxes to run at high speeds to generate heat. The thermal stability of ARMB lubricants ensures that they can perform consistently, even at high temperatures.

Longevity and Cost Efficiency

Grease suppliers near me increase the lifespan of gearbox parts and therefore reduce the cost of the components and maintenance as well.

Your Guide on how to identify and repair gearbox issues.

If You Start Experiencing Gearbox Vibrations Or Weird Noises, Here Is What to Do;

1)Inspect for Misalignment

Verify the alignment between the gearbox and any equipment it is connected to. Laser alignment tools should be used to measure these distances and adjustments made if necessary.

2)Examine Lubrication Levels

Check the gearbox for appropriate lubrication. Replenish, or substitute the lubricant with ARMB products to make sure it has the contrastive performance.

3)Check for Bearing Wear

Check the bearings closely to see if they are worn out or damaged. Retain the worn-out bearings and maintain them lubricated.

4)Inspect Gears for Damage

Check the gears for cracks or chips, and uneven wear visually. But gears with damage need to be changed as soon as possible, otherwise, other damage can occur.

5)Prevent Contamination

Check that the remaining gearbox seals are intact, and replace any that are compromised. Apply ARMBs lubricants to avoid contamination and keep them clean.

6)Avoid Overloading

Run that gearbox only within its design-load limits. Apart from generating vibrations and noise, overloading reduces the life of the gearbox.

The Preventive Maintenance of ARMB Oils

Maintaining the health of your gearbox is very important to avoid the problem in the first place. Here is how you can make ARMB lubricants in your maintenance:

Perform Regular Inspections: Inspect the gearbox for wear, misalignment, and lubrication periodically.

Change Lubricants promptly: Adhere to the manufacturer’s replacement specifications for lubricants. To maintain performance, to take advantage of diffusivity use ARMB products.

Track the operating parameters: Check for parameters such as temperature, load, and noise levels during the running of the equipment. Something should be wrong, if it shows an uncommon reading.

Train Operators: Well-trained operators recognize the warning signs of gearbox problems long before they require major repairs.

What Makes ARMB So Special for Gearbox Maintenance?

ARMB lubricants continues to remain a reliable partner in lubrication solutions with its quality and innovations. ARMB products are engineered to meet the most rigorous requirements for industrial and automotive applications; ensuring your gearbox is performing well. ARMB lubricants are your investment in reliability, efficiency, and sustainability.

Final Thoughts

The first sign of a problem comes from the gearbox, the existing vibrations or strange noises are warning signs not to be neglected. The best way to avoid expensive breakdowns and premature replacement of your equipment is to pinpoint the sources of these causes and alleviate them with prescribed high-quality lubricants from ARMB. And, using ARMB premium diesel engine oils and grease lubricants in your maintenance schedule regularly, you will ensure gearbox will perform best, and provide satisfaction.

Gearbox issues can bring your operations to a standstill. So, go for ARMB for all lubrication requirements and witness the difference in performance and reliability.

Our focus is on improving the quality of our services and on meeting all timeframes and schedules. We will be improving the recruitment, selection, training and development of our staff with particular focus on the strategic job families, we ensure that we have quality systems to support.

Write Us

    • +971 4 584 7187

    • +971 5 542 88 887

    • Office No.: 1504, Executive Bay Tower, Business Bay Dubai - UAE, P.O.Box: 95382

    • Saudi Arabia office: Al Bronze int. Est. Al Riyadh

    • Yemen office: Aden +967 77 712 2415

    • Sat-Thu: 9 am - 6 pm